an official journal of: published by:
an official journal of: published by:
Editor in Chief: RAFFAELLO COSSU

CHARACTERIZATION OF LANDFILL MINING MATERIAL AFTER BALLISTIC SEPARATION TO EVALUATE MATERIAL AND ENERGY RECOVERY POTENTIAL

  • Cristina Garcia Lopez - Department of Processing and Recycling, RWTH Aachen University, Germany
  • Anita Ni - Department of Processing and Recycling, RWTH Aachen University, Germany
  • Juan Carlos Hernández Parrodi - New-Mine project, Renewi Belgium SA/NV, Belgium - Chair of Waste Processing Technology and Waste Management, Montanuniversität Leoben, Austria
  • Bastian Küppers - Chair of Waste Processing Technology and Waste Management, Montanuniversität Leoben, Austria
  • Karoline Raulf - Department of Processing and Recycling, RWTH Aachen University, Germany
  • Thomas Pretz - Department of Processing and Recycling, RWTH Aachen University, Germany

Released under CC BY-NC-ND

Copyright: © 2018 CISA Publisher


Abstract

For decades, ballistic separators have been used in Europe as a means of sorting waste to separate mixed waste material streams at material recovery facilities and municipal solid waste treatment plants. Currently, with the growing need to remediate landfill sites, ballistic separators can be employed to recover calorific fractions from excavated landfill material within the framework of enhanced landfill mining. Ballistic separators provide multiple separation steps in one machine: they sort flat two-dimensional materials from rigid three-dimensional materials, while the material is screened to a selected particle size at the same time. The present study shows the results obtained during an investigation performed at the landfill in Mont-Saint-Guibert, Belgium. The main objectives were to acquire first-hand information regarding the efficiency of the ballistic separator in relation to processing old and untreated landfilled material and to study the potential of the landfill as a reservoir of secondary resources. The excavated material was processed through a pre-treatment chain of steps, including material classification and separation, as well as particle size reduction. As a first step, the material was processed with a ballistic separator using two different mesh sizes, 200 mm and 90 mm. Subsequently, the performance of the separator in question was evaluated, especially regarding its effectiveness in the production of refuse derived fuel. The two-dimensional flow was characterized by combustible materials from municipal solid waste and the three-dimensional by construction and demolition waste. As a result, 46% (dry basis) of the input material were fines particles <20 mm, 3% had a calorific value of 22.4 MJ kg-1, 1% 16.0 MJ kg-1 and approximately 1% were magnetic metals that could be recovered by mechanical processes. The results of processing and valorising the potential resources disposed in landfills are essential for the implementation of enhanced landfill mining since revenues from material and energy recovery could contribute to the economic feasibility of the project.

Keywords


Editorial History

  • Received: 30 Oct 2018
  • Revised: 31 Jan 2019
  • Accepted: 22 Feb 2019
  • Available online: 01 Aug 2019

References

Bauer, M., Lehner, M., Schwabl, D., Flachberger, H., Kranzinger, L., Pomberger, R., & Hofer, W. (2018). Sink–float density separation of post-consumer plastics for feedstock recycling. Journal of Material Cycles and Waste Management, 20(3), 1781–1791

Beel, H. (2017). Sortierung von schwarzen Kunststoffen nach ihrer Polymerklasse mit Hyperspectral-Imaging-Technologie: Recycling und Rohstoffe. Neuruppin: TK Verlag Karl Thomé-Kozmiensky

Bhatnagar, A., Kaczala, F., Burlakovs, J., Kriipsalu, M., Hogland, M., & Hogland, W. (2017). Hunting for valuables from landfills and assessing their market opportunities. A case study with Kudjape landfill in Estonia. Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA, 35(6), 627–635

Bureau d´études greisch (2002). Interview with Centre d´Enfouissement Technique de Mont-Saint-Guibert: Etude des conséquences de l´octroi du permis d´urbanisme du 29.10.01 sur les conditions d´exploitation du permis du 16.12.98

Department of Processing and Recycling (2014). Retrieved October 13, 2018, from https://www.iar.rwth-aachen.de/cms/IAR/Forschung/-Experimentelle-Arbeiten/~efnu/Technikum/lidx/1/

DIN 51900-1 (2000). Determination of gross calorific value by the bomb calorimeter and calculation of net calorific value

DIN CEN/TS 15414-1 (2010). Solid recovered fuels - Determination of moisture content using the oven dry method

DIN EN 15359 (2005). Solid recovered fuels -Specifications and classes

Energy research Centre of the Netherlands (2018). Phyllis2, database for biomass and waste,, from Energy research Centre of the Netherlands: https://www.ecn.nl/phyllis2

European Parliament (2013). Decision No 1386/2013/EU of the European Parliament and of the Council of 20 November 2013 on a General Union Environment Action Programme to 2020 Living well, within the limits of our planetText with EEA relevance. In Official Journal of the European Union

García López, C., Küppers, B., Clausen, A., & Pretz, T. (2018). Landfill mining: A case study regarding sampling, processing and characterization of excavated waste from an Austrian Landfill. Detritus, 2(1), 29

Giani, H., Fidalgo Estevez, R., Kaufelf, S., Althaus, M., & Pretz, T. (Eds.). 2016. Technical-economic evaluation of an advanced MBT process to enrich biomass as renewable fuel. Cyprus

Hermann, R., Baumgartner, R. J., Sarc, R., Ragossnig, A., Wolfsberger, T., Eisenberger, M., et al. (2014). Landfill mining in Austria: Foundations for an integrated ecological and economic assessment. Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA, 32(9 Suppl), 48–58

Hernández Parrodi, J. C., García López, C., Raulf, K., Pretz, T., Küppers, B., & Vollprecht, D. (2018b). Characterization of Fine Fractions from Landfill Mining - A Case Study of a Landfill Site in Belgium. VORTRÄGE-Konferenzband zur 14. Recy & DepoTech-Konferenz. (14), 569–576

Hernández Parrodi, J. C., Vollprecht, D., & Pomberger, R. (2018a). Characterization of Fine Fractions from Landfill Mining - A Review of Previous Investigations. Detritus, 2(1), 46

Hogland, M., Marques, M., 2010. Enhanced Landfill Mining: Material recovery, energy utilisation and economics in the EU (Directive) perspective. In: Proceedings of the International Academic Symposium on Enhanced Landfill Mining. Molenheide, Belgium

Hull, R. M., Krogmann, U., & Strom, P. F. (2005). Composition and Characteristics of Excavated Materials from a New Jersey Landfill. Journal of Environmental Engineering, 131(3), 478–490

Jani, Y., & Kaczala, F., Marchand, C., Hogland, M., Kriipsalu, M., Hogland, W., & Kihl, A. (2016). Characterisation of excavated fine fraction and waste composition from a Swedish landfill. Waste Management & Research, 34 (12), 1292–1299

Jones, P. T., Geysen, D., Tielemans, Y., van Passel, S., Pontikes, Y., Blanpain, B., et al. (2013). Enhanced Landfill Mining in view of multiple resource recovery: A critical review. Journal of Cleaner Production, 55, 45–55

Kaartinen, T., Sormunen, K., & Rintala, J. (2013). Case study on sampling, processing and characterization of landfilled municipal solid waste in the view of landfill mining. Journal of Cleaner Production, 55, 56–66

Kranzinger, L., Schopf, K., Pomberger, R., & Punesch, E. (2017). Case study: Is the ‘catch-all-plastics bin’ useful in unlocking the hidden resource potential in the residual waste collection system? Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA, 35(2), 155–162

Kuchta, K., Hobohm, J., & Flamme, S. (2017). Verwertung von Altprodukten und Abfällen. In: KRANERT, Martin (Hrsg.): Einführung in die Kreislaufwirtschaft : Planung -- Recht -- Verfahren, 253–293

Martens, H., & Goldmann, D. (2016). Recyclingtechnik: Fachbuch für Lehre und Praxis (2. Aufl. 2016). Wiesbaden: Springer Fachmedien Wiesbaden

Maul, A., & Pretz, T. (2016). Landfill Mining from the processing perspective - a view on mass balance and output streams. Proceeding “3rd International Academic Symposium on Enhanced Landfill Mining, ELFM III”, Lisboa (Portugal)

Ministerium für Umwelt und Forsten Rheinland-Pfalz (1983). LAGA - RL. PN 2/78K - Grundregeln für die Entnahme von Proben aus Abfällen und abgelagerten Stoffen. Richtlinie für das Vorgehen bei physikalischen und chemischen Untersuchungen im Zusammenhang mit der Beseitigung von Abfällen

Ministerium für Umwelt und Forsten Rheinland-Pfalz (2001). LAGA PN 98 - Richtlinie für das Vorgehen bei physikalischen, chemischen und biologischen Untersuchungen im Zusammenhang mit der Verwertung/Beseitigung von Abfällen

Quaghebeur, M., Laenen, B., Geysen, D., Nielsen, P., Pontikes, Y., van Gerven, T., & Spooren, J. (2013). Characterization of landfilled materials: Screening of the enhanced landfill mining potential. Journal of Cleaner Production, 55, 72–83

Rotter, V. S., Lehmann, A., Marzi, T., Möhle, E., Schingnitz, D., & Hoffmann, G. (2011). New techniques for the characterization of refuse-derived fuels and solid recovered fuels. Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA, 29(2), 229–236

Seifert, H., & VEHLOW, J. (2017). Thermische Verfahren In: KRANERT, Martin (Hrsg.): Einführung in die Kreislaufwirtschaft : Planung -- Recht --, 5 Wiesbaden : Springer Fachmedien Wiesbaden, 423–470

Sigmund, U. (2018). Sorting with ballistic separators. 4th International Symposium on Enhanced Landfill Mining, 89–94

van Vossen, W. J., & Prent, O. J. (2011). Feasibility study: Sustainable material and energy recovery from landfills in Europe. Proceedings Sardinia 2011. Thirteenth International Waste Management and Landfill Symposium. 3 - 7 Oct., 247–248

Wolfsberger, T., Aldrian, A., Sarc, R., Hermann, R., Höllen, D., Budischowsky, A., et al. (2015b). Landfill mining:: Resource potential of Austrian landfills-Evaluation and quality assessment of recovered municipal solid waste by chemical analyses. Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA, 33(11), 962–974

Wolfsberger, T., Nispel, J., Sarc, R., Aldrian, A., Hermann, R., Höllen, D., et al. (2015a). Landfill mining:: Development of a theoretical method for a preliminary estimate of the raw material potential of landfill sites. Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA, 33(7), 671–680