an official journal of: published by:
an official journal of: published by:
Editor in Chief: RAFFAELLO COSSU

USE OF ACRYLONITRILE-BUTADIENE-STYRENE FROM WASTE ELECTRIC AND ELECTRONIC EQUIPMENT WITHOUT AN ACCURATE PREVIOUS SEPARATION

  • Yamila V. Vazquez - Planta Piloto de Ingeniería Química and Departamento de Ingeniería Química, Universidad Nacional del Sur, Argentina
  • Silvia E. Barbosa - Planta Piloto de Ingeniería Química and Departamento de Ingeniería Química, Universidad Nacional del Sur, Argentina

Released under CC BY-NC-ND

Copyright: © 2018 Cisa Publisher


Abstract

The aim of this work it to develop recycling strategies for Acrylonitrile-Butadiene-Styrene (ABS), coming from plastic WEEE stream, avoiding sorting by type. Self-compatibilization of ABS/HIPS blends, as well as the addition of Styrene-Butadiene-Styrene (SBS) as a compatibilizer to ABS/HIPS blends in order to improve mechanical properties, were studied. In this way, thermal behavior, mechanical performance and morphology of ABS/HIPS physical blends with two different proportions, 80/20 and 50/50, was analyzed comparatively with single ABS to assess self-compatibilization effectiveness. Obtained results indicate that ABS/HIPS self-compatibilization is effective. ABS can tolerate up to 50 wt% of HIPS conserving its properties with a slight improvement in ductility and strength. This allows a wider error in plastic sorting by type within plastic WEEE stream and consequently costs can be reduced. Same blends proportions with the addition of 2 wt% of SBS was also studied in comparison to their physical blends and single ABS. Mechanical properties of SBS-compatibilized blends were notably improved with respect to physical blends and consequently to ABS. Results are very promising for plastic WEEE recycling leading to a sustainable strategy that can promote the reuse of recycled ABS blended with other plastic WEEE instead of single ABS.

Keywords


Editorial History

  • Received: 17 Jan 2018
  • Accepted: 16 Jun 2018
  • Available online: 30 Jun 2018

References

Arends D., Schlummer M., Mäurer A., Markowski J., Wagenknecht U. (2015). Characterization and materials flow management for waste electrical and electronic equipment plastics from German dismantling centers. Waste Management & Research, 33(9), 775-784.

Arnold J C, Watson T, Alston S, Carnie M, Glover C. (2010) The use of FTIR mapping to assess phase distribution in mixed and recycled WEEE plastics. Polymer Testing, 29: 459–470.

Baldé C. P., Wang F., Kuehr R., Huisman J. (2015). The global e-waste monitor – 2014, United Nations University. IAS-SCYCLE, Bonn, Germany.

Baxter J., Wahlstrom M., Zu Castell-Rüdenhausen M., Fråne, A., Stare M., Løkke, S., Pizzol M. (2014). Plastic value chains: Case: WEEE (Waste Electric and electronic equipment) in the Nordic region. Nordic Council of Ministers, TemaNord, Denmark.

Beigbeder J., Perrin D., Mascaro J. F., Lopez-Cuesta J. M. (2013). Study of the physicochemical properties of recycled polymers from waste electrical and electronic equipment (WEEE) sorted by high resolution near infrared devices. Resources Conservation & Recycling, 78: 105–114.

Bisio A. L., Xanthos M. How to Manage Plastics Wastes: Technology and Market Opportunities. New York: Hanser, 1995.

Brennan L. B., Isaac D. H., Arnold J. C. (2002). Recycling of Acrylonitrile–Butadiene–Styrene and High- Impact Polystyrene from Waste Computer Equipment. Journal of Applied Polymer Science, 86(3): 572-578.

Buekens A., Yang J. (2014). Recycling of WEEE plastics: a review. Journal of Material Cycles and Waste Management, 16(3):415-34.

Ceballos D., Chen L., Page E., Echt A., Oza A., Ramsey J. Health Hazard Evaluation Report: Evaluation of Occupational Exposures at an Electronic Scrap Recycling Facility. U.S. Department of Health and Human Services, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health. Cincinnati, Ohio: NIOSH, 2014.

Cui J., Forssberg E. (2003). Mechanical recycling of waste electric and electronic equipment: a review. Journal of Hazardous Materials, 99: 243–263.

Davis B. D., Paul D. R., Bucknall C. B. Polymer blends, vol. 1. New York: Wiley, 2000. pp. 501-538.

de Souza A. M. C., Cucchiara M. G., Ereio A. V. (2016). ABS/HIPS blends obtained from WEEE: Influence of processing conditions and composition. Journal of Applied Polymer Science, 133(34).
DOI 10.1002/app.43831

Elmendorp J. J., Van der Vegt A. K., Utraki L. A. Two-phase polymer systems. Munich: Hanser, 1991. pp. 165-183.

European Union (2011). Directive 2011/65/EC of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (recast), RoHS 2. Official Journal of the European Union, 174: 88–110.

Goodship V., Stevels A. (2012). Waste Electrical and Electronic Equipment (WEEE) Handbook. Woodhead, USA.

Hirayama D., Saron C. (2018). Morphologic and mechanical properties of blends from recycled acrylonitrile-butadiene-styrene and high-impact polystyrene. Polymer, 135: 271-278.

Maris E., Botané P., Wavrer P., Froelich D. (2015). Characterizing plastics originating from WEEE: a case study in France. Mineral Engineering, 76: 28–37.

Martinho G., Pires A., Saraiva L., Ribeiro R. (2012). Composition of plastics from waste electrical and electronic equipment (WEEE) by direct sampling. Waste Management, 32: 1213–1217.

Namias J. (2013). The Future of Electronic Waste Recycling in the United States: Obstacles and Domestic Solutions. Department of Earth and Environmental Engineering, Columbia University, USA.

Peydro Rasero M. A., Garcia F. P., Navarro Vidal. R., Crespo Amoros J. E. (2015). Influence of styrene–ethylene–butylene–styrene on the properties of acrylonitrile butadiene styrene–high-impact polystyrene blends. Journal of Elastomers & Plastics, 47(5): 449-62.

Tarantili P. A., Mitsakaki A. N., Petoussi M. A. (2010). Processing and properties of engineering plastics recycled from waste electrical and electronic equipment (WEEE). Polymer Degradation and Stability, 95(3):405-410.

Tall S. (2000). Recycling of mixed plastic waste. Doctoral dissertation, Institutionen för polymerteknologi. Department of Polymer Technology, Royal Institute of Technology Stockholm, Sweden.

Utracki L. A. (1991). Polymer Alloys and Blends: State of the Art. National Research Council Canada, Industrial Materials Institute.

Vazquez Y. V; Barbosa S. E. (2016). Recycling of mixed plastic waste from electrical and electronic equipment. Added value by compatibilization. Waste Management, 53: 196-203.

Vazquez Y. V; Barbosa S. E. (2017). Process Window for Direct Recycling of Acrylonitrile-Butadiene-Styrene and High-Impact Polystyrene from Electrical and Electronic Equipment Waste. Waste Management, 50: 403-408.

WRAP (2009). Separation of mixed WEEE plastics final report (WRAP Project MDD018 and MDD023). Report prepared by Axion Consulting.

Wu S. Polymer interfaces and adhesion. New York: Marcel Dekker, 1982.

Zhang C., Guo Y., Priestley R. D. (2011). Glass transition temperature of polymer nanoparticles under soft and hard confinement. Macromolecules, 44(10): 4001-4006.