ENVIRONMENTAL ASSESSMENT OF GLASS FIBER REHINFORCED POLYMER (GFRP) VALORISATION PROCESSES FROM THE DECOMMISSIONING OF WIND TURBINES
- Emanuela De Marco - Department for Sustainability, Energy and Sustainable Economic Development, ENEA, Italy
- Valentina Fantin - Department for Sustainability, Energy and Sustainable Economic Development, ENEA, Italy
- Laura Cutaia - Department for Sustainability, Energy and Sustainable Economic Development, ENEA, Italy
- Cristian Chiavetta - Department for Sustainability, Energy and Sustainable Economic Development, ENEA, Italy
- Available online in Detritus - In Press
Access restricted to subscribed members only
Released under All rights reserved
Copyright: © 2024 CISA Publisher
Abstract
The production of wind energy is one of the most mature technologies in the field of renewable energy, and the rapid technological advances bring out the need to replace the old models of wind turbines with more efficient versions. Operators must plan the management of a large amount of resource flows from the end-of-life wind farm disposal. The use of composite materials, in particular epoxy resins reinforced with glass fibers (Glass Fiber Reinforced Polymer - GRFP), most used in the wind blades, makes the material separation and recovery operations quite complex. The purpose of the study is to compare the environmental performance of the life cycle of two treatment processes (mechanical recycling and co-processing in cement kiln), identified by literature as possible technologies for the treatment of GFRP, including also the environmental benefits obtainable through the valorisation of both the waste material itself (used as fuel) and the secondary material obtained at the end of the treatment process. The LCA study provides some general considerations about the possible recycling and recovery of GFRP material contained in wind turbine blades. In general terms, it can be stated that co-processing in cement kilns is a highly efficient process because it allows energy to be recovered from the waste material and part of it to be integrated into the clinker production process.Keywords
Editorial History
- Received: 27 Jun 2024
- Revised: 30 Aug 2024
- Accepted: 04 Sep 2024
- Available online: 25 Oct 2024
References
3D Wall Panels Italia 3D Wall Panels Italia [Online] / prod. CM PRODUCT GROUP SRL. - 2024. - https://it.3dwallpanels-italia.com/
Chen Shanshan [et al.] Promoting Interspecies Electron Transfer with Biochar [Journal] // Scientific Reports. - 2014. - 5019 : Vol. 4
European Commission - Joint Research Centre Institute for Environment and Sustainability: International Reference Life Cycle Data System (ILCD) Handbook Specific guide for Life Cycle Inventory data sets. First edition March 2010 [Book]. - Luxembourg. : Office of the European Union, 2010
European Commission PEFCR Guidance document, - Guidance for the development of Product Environmental Footprint Category Rules (PEFCRs), version 6.3 [Report]. - 2017
Gees Recycling Gees Recycling [Online] / prod. Gees Recycling Srl ©. - 2024. - https://www.geesrecycling.com/brevetto-compounding-recycling.asp
Gonçalves R.M., Martinho Alberto and Oliveira J.P. Recycling of Reinforced Glass Fibers Waste: Current Status [Journal] // Materials. - 2022. - 4 : Vol. 15
Howarth J, Mareddy Sada S.R. and Mativenga Paul T. Energy intensity and environmental analysis of mechanical recycling of carbon fibre composite [Journal] // Journal of Cleaner Production. - 2014. - Vol. 81. - pp. 46-50
IEA World Energy Outlook 2023 [Report]. - Paris : Licence: CC BY 4.0 (report); CC BY NC SA 4.0, 2023
Jacob Amanda Composites can be recycled [Journal] // Reinforced Plastics. - May-June 2011. - 3 : Vol. 55. - pp. 45-46
Karuppannan Gopalraj Sankar [et al.] Life Cycle Assessment of a Thermal Recycling Process as an Alternative to Existing CFRP and GFRP Composite Wastes Management Options [Journal] // Polymers. - 2021. - 24 : Vol. 13
Krauklis Andrey E. [et al.] Composite Material Recycling Technology—State-of-the-Art and Sustainable Development for the 2020s [Journal] // Special Issue From Waste to Advance Composite Materials. - 2021. - 1 : Vol. 5
Liu Pu , Meng Fanran e Barlow Claire Y. Wind turbine blade end-of-life options: An eco-audit comparison [Journal] // Journal of Cleaner Production. - 2019. - Vol. 212. - p. 1268-1281
Liu Pu , Meng Fanran and Barlow Claire Y. Wind turbine blade end-of-life options: An economic comparison [Journal]. - 2022. - Vol. 180. - pp. 106-202
Oliveux Géraldine , Dandy Luke O. and Leeke Gary A. Current status of recycling of fibre reinforced polymers: Review of technologies, reuse and resulting properties [Journal] // Progress in Materials Science. - 2015. - Vol. 72. - pp. 61-99
Palmer James Alexander Thomas Mechanical Recycling of Automotive Composites for Use as Reinforcement in Thermoset Composites [Report]. - Exeter : University of Exeter, 2009
UNI UNI EN ISO 14040:2021 Gestione ambientale - Valutazione del ciclo di vita - Principi e quadro di riferimento. - 2021a
UNI UNI EN ISO 14044:2021 Gestione ambientale - Valutazione del ciclo di vita - Requisiti e linee guida.. - 2021b
Vestas, Wind Systems 2 MW platform [Online]. - 2024. - june 3, 2024. - https://nozebra.ipapercms.dk/Vestas/Communication/Productbrochure/2MWTurbineBrochure/2mw-platform-brochure/?page=1
Wernet Gregor [et al.] The ecoinvent database version 3 (part I): overview and methodology [Journal] // Int J Life Cycle Assess. - 2016. - Vol. 21. - pp. 1218-1230
Wind Europe Decommissioning of Onshore Wind Turbines - Industry Guidance Document [Report]. - [s.l.] : Rory O’Sullivan, 2020
WindEurope – Cefic - EuCIA Accelerating Wind Turbine Blade Circularity - 2020 [Report]. - 2020
Yazdanbakhsh Ardavan and Bank Lawrence C. A Critical Review of Research on Reuse of Mechanically Recycled FRP Production and End-of-Life Waste for Construction [Journal] // Polymers - Special Issue Fiber-Reinforced Polymer Composites in Structural Engineering. - 2014. - 6 : Vol. 6. - pp. 1810-1826
Zampori Luca and Pant Rana Suggestions for updating the Product Environmental Footprint (PEF) method [Report] / European Commission - JRC. - Luxembourg : Publications Office of the European Union, 2019