an official journal of: published by:
an official journal of: published by:
Editor in Chief: RAFFAELLO COSSU


  • Tamer M. Ismail - Department of Mechanical Engineering, Suez Canal University, Egypt
  • Khaled Ramzy - Department of Mechanical Engineering, Suez Canal University, Egypt
  • Hisham Sherif - Department of Mechanical Engineering, Minya University, Egypt

Released under CC BY-NC-ND

Copyright: © 2020 CISA Publisher


Solar energy can be effectively used for drying, especially when the cost of fuel used for conventional dryers is high. The drying of refuse-derived fuel (RDF) is a complicated process involving mass and heat transfer and depends on external variables such as humidity, temperature, and air velocity as well as internal variables, e.g., material surface, physical structure, chemical composition, size, and shape. Herein, a solar tunnel dryer integrated with a flat-plate solar collector was designed and fabricated at the Faculty of Engineering, Suez Canal University, Egypt. The experiments were performed during July 2019. The weather characteristics as well as the variation in moisture content with time were recorded continually. The results indicated that the maximum efficiencies of the solar collector were 46.6%, 53.4%, and 40.0% on 2, 4, and 6 July, 2019, respectively. Moreover, on these days, the moisture content of RDF decreased from 35.6% to 9.6%, from 28.3% to 8.5%, and from 43.5% to 14.0%. The dryer efficiency varied over 14.1–29.5% depending on the drying air stream temperature. The maximum dryer efficiencies recorded were 23.8%, 29.5%, and 25.8% on 2, 4, and 6 July, 2019, respectively.


Editorial History

  • Received: 07 Jan 2020
  • Revised: 26 Jun 2020
  • Accepted: 01 Jul 2020
  • Available online: 30 Nov 2020


Abdullah A.S., Abou Al-sood M.M., Omara Z.M., Bek M.A. and Kabeel A.E., 2018, Performance evaluation of a new counter flow double pass solar air heater with turbulators, Solar Energy, Vol. 173, pp. 398-406

Asadi, F., Drying of Refuse-Derived Fuel (RDF), University College of Southeast Norway Faculty of Technology, Norway, 2016

ASAE Standard, 1998. Psychrometric data. ASAE D271.2 DEC 94: 24-31

Beyene H.D., Werkneh A. A and Ambaye T.G., Current updates on waste to energy (WtE) technologies: a review, Renewable Energy Focus, 24, 2018

Caputo A.C. and Pelagagge P.M., 2002, RDF production plants: I. Design and costs, Applied Thermal Engineering, Vol. 22, pp. 423 - 437

Caputo A.C. and Pelagagge P.M., 2002, RDF production plants: II. Economics and profitability, Applied Thermal Engineering, Vol. 22, pp. 439-448

Caputo A.C., Palumbo M. and Scacchia F., 2004, Perspectives of RDF use in decentralized areas: comparing power and co-generation solutions, Applied Thermal Engineering, Vol. 24, pp. 2171-2187

Ekechukwu O. V. and Norton B., 1999, "Review of Solar-Energy Drying Systems II: An Overview of Solar Drying Technology", Energy Conversion and Management, Vol. 40, pp. 615-655

Elicin, A.K. and Sacilik K., 2005, An experimental study for solar tunnel drying of apple. Tarim Bilimleri dergisi,Vol. 11(2), pp. 207-11

Fadhel A, Kooli S, Farhat A and Bellghith A, 2005, "Study of The Solar Drying of Grapes By Three Different Processes", Desalination, Vol. 185, pp. 535-541

Ferreira A.G, Gonçalves L.M and Maia C.B., 2014, Solar drying of a solid waste from steel wire industry. Applied thermal engineering, Vol. 73(1), pp. 104-110

Golisz E., Jaros M. and Kalicka M., 2013, Analysis of Convectional Drying Processof Peach, Technical Sciences Vol.16(4), pp. 333-343

He P.J, Shao Z.H, Zhang D.Q and Shao L.M. Bio-stabilization of municipal solid waste prior to landfill: Environmental and economic assessment. III International Symposium MBT and MRF. Waste-to-Resources; 2009

Holman, J. P., 1994, “Experimental Method for Engineers”, 6th ed. McGraw-Hill, Singapore

Hossain, M.A., and Bala, B.K. 2007. Drying of hot chilli using solar tunnel drier. Solar Energy, Vol. 81, pp. 85-92

Jannot Y. and Coulibaly Y., 1998, The ‘Evaporative Capacity’’ As A Performance Index For A Solar-Drier Air-Heater. Solar Energy, Vol. 63, pp. 387-391

Kabeel A. E., 1998, Shape optimization for absorber plates of solar air collectors, Renewable Energy, Vol. 13(1), pp. 121-131

Kabeel A.E. Performance of solar still with a concave wick evaporation surface. Energy 2009; Vol. 34(10), pp. 1504-9

Kabeel A.E., Hamed M.H., Omara Z.M. and Kandel A.W., 2018, On the performance of a baffled glazed-bladed entrance solar air heater, Applied Thermal Engineering, Vol. 139, pp. 367-375

Kabeel A.E., Hamed M.H., Omara Z.M. and Kandeal A.W., 2017, Solar air heaters: Design configurations, improvement methods and applications – A detailed review, Renewable and Sustainable Energy Reviews, Vol. 70, pp. 1189-1206

Kassem A.S, Al-Sulaiman M.A., Aboukarima A.M. and Kassem S.S., 2011, Predicting Drying Efficiency during Solar Drying Process of Grapes Clusters in a Box Dryer using Artificial Neural Network, Australian Journal of Basic and Applied Sciences, Vol. 5(6), pp. 230-241

Kooli, S., Fadhel A., Farhat A. and Belghith A., 2007, Drying of red pepper in open sun and greenhouse conditions: Mathematical modeling and experimental validation. Journal of Food Engineering, Vol. 79(3), pp. 1094-103

Koser HJK, Schmalstieg G. and Siemers W., 1982, Densification of water hyacinth. Fuel, Vol. 61, pp. 791-798

Luca A. and Raffaello C., 2015, Food waste generation and industrial uses: A review, Waste Management, Vol. 36, pp. 147-155

Mumba J. 1996, Design and development of a solar grain dryer incorporating photovoltaic powered air circulation. Energy Conversion Management,Vol. 37(5), pp. 615-621

Peng Lu, Qunxing Huang, A.C. (Thanos) Bourtsalas, Yong Chi, Jianhua Yan, 2017, Experimental research of basic properties and reactivity of waste derived chars. Applied Thermal Engineering, Vol. 119, pp. 639–649

Prasad J., Vijay V.K., Tiwari G.N. and Sorayan V.P.S., 2006, Study on performance evaluation of hybrid drier for turmeric (Curcuma longa L.) drying at village scale. Journal of Food Engineering, Vol. 75, pp. 497–502

Savage G.,1989, Thermal conductivity and specific heat of densified refuse derived fuel, Waste management & research, vol. 7, pp. 83-92

Sencan, A. and Ozdemir G., 2007, Comparison of thermal performance predicted and experimental of solar air collector. Journal of Applied Sciences, Vol. 7(23), pp. 3721-3728

Usub, T., Lertsatithanakorn C., Poomsaad N., Yang L., and Siriamornpun S., 2008, Experimental performance of a solar tunnel dryer for drying silkworm pupae. Bio systems Engineering, Vol. 101, pp. 209–16

Yasuhara A., Amanoa Y. and Shibamoto T., 2010, Investigation of the self-heating and spontaneous ignition of refuse-derived fuel (RDF) during storage, Waste Management, Vol. 30, pp. 1161-1164

Yuan J, Zhang D, Li Y, Chadwick D, Li G, Li Y and Du L.M 2017, Effects of adding bulking agents on biostabilization and drying of municipal solid waste. Waste Manage. Vol. 62, pp. 52-60

Zamrudy W., Santosa S., Budiono A. and Naryono E., 2019, A review of Drying Technologies for Refuse Derived Fuel (RDF) and Possible Implementation for Cement Industry, International Journal of Chem Tech Research, Vol.12 (1), pp. 307-315