RECYCLED SISAL FIBER-REINFORCED POLYPROPYLENE DERIVED FROM INDUSTRIAL WASTE STREAM

---

• Available online in Detritus - In Press
• Pages

---

Abstract

This paper presents the development and comprehensive characterization of recycled polypropylene (rPP) composites reinforced with recovered sisal fibers sourced from secondary agricultural waste streams. The rPP matrix was obtained from post-industrial waste generated during the manufacturing of household appliances at Hisense GORENJE company (Slovenia). To enhance the interfacial compatibility between the hydrophobic polymer matrix and the lignocellulosic reinforcement, maleic anhydride-grafted polypropylene (MAPP) was incorporated at a constant concentration of 3 wt.% as a compatibilizing agent. Composite formulations containing 10, 20, and 30 wt.% of sisal fibers were systematically investigated through mechanical testing (tensile strength, tensile modulus, and impact resistance), morphological analysis (SEM), spectroscopic characterization (FTIR), and thermal analyses (TGA–DTA and DSC). FTIR analysis suggested the interactions between the functional groups of MAPP and the lignocellulosic fibers; however, no distinct absorption band attributable to ester carbonyl formation was detected. SEM observations revealed improved fiber–matrix adhesion in the compatibilized systems, supporting the effectiveness of MAPP in promoting the interfacial bonding. The addition of sisal fibers significantly enhanced the mechanical performance of the rPP, with increases of up to 45% in tensile modulus and 92% in tensile strength at 30 wt.% fiber loading. Nevertheless, the composite containing 20 wt.% sisal fibers exhibited the most favorable balance between stiffness, strength and impact resistance. Overall, the results demonstrate the strong potential of rPP/sisal composites as lightweight, sustainable materials, enabling the dual valorization of industrial and agricultural waste streams and supporting circular-economy-oriented applications in the white-goods sector.

---

Keywords

• Recycled composites
• Sisal fibers
• Mechanical properties
• Morphology
• Coupling agents
• Thermogravimetric analysis

---

Editorial History

• Received: 29 Nov 2025
• Revised: 27 Feb 2026
• Accepted: 06 Mar 2026
• Available online: 22 Mar 2026

---

References

Ajayi, N. E., Rusnakova, S., Ajayi, A. E., Ogunleye, R. O., Agu, S. O., & Amenaghawon, A. N. (2025). A comprehensive review of natural fiber reinforced polymer composites as emerging materials for sustainable applications. Applied Materials Today, 43, 102666.
DOI 10.1016/j.apmt.2025.102666

Arrakhiz, F. Z., El Achaby, M., Malha, M., Bensalah, M. O., Fassi-Fehri, O., Bouhfid, R., Benmoussa, K., & Qaiss, A. (2013). Mechanical and thermal properties of natural fibers reinforced polymer composites: Doum/low density polyethylene. Materials & Design, 43, 200–205.
DOI 10.1016/j.matdes.2012.06.056

Bassyouni, M. (2018). Dynamic mechanical properties and characterization of chemically treated sisal fiber-reinforced polypropylene biocomposites. Journal of Reinforced Plastics and Composites, 37(23), 1402-1417.
DOI 10.1177/0731684418798049

Bermello, A., Díaz, D., Martínez, R., Quintana, G., Mieres, G., & Leal, J. A. (2008). Estudio de un material compuesto de partículas de bagazo de caña y matriz de polietileno mediante espectrometría FTIR. ICIDCA. Sobre los Derivados de la Caña de Azúcar, 42(1-3), 106-111. https://www.redalyc.org/pdf/2231/223120667015.pdf

Caicedo, C., Crespo-Delgado, L. M., De La Cruz-Rodríguez, H. y Álvarez-Jaramillo, N. A. (2017). Propiedades termo-mecánicas del Polipropileno: Efectos durante el reprocesamiento. Ingeniería Investigación y Tecnología, 18(3), 245-252.
DOI 10.22201/fi.25940732e.2017.18n3.022

Chiou, A.-H., & Lin, C.-H. (2023). Material and mechanical characterization of recycled polypropylene reinforced with different weight percentages of short glass fiber developed by injection molding. Heliyon, 9(9), e19403.
DOI 10.1016/j.heliyon.2023.e19403

Essabir, H., Hilali, E. M., Elgharad, A., Minor, H. E., Imad, A., Elamraoui, A., & Gaoudi, O. A. (2013). Mechanical and thermal properties of bio-composites based on polypropylene reinforced with Nut-shells of Argan particles. Materials & Design, 49, 442-448.
DOI 10.1016/j.matdes.2013.01.025

Fan, M., & Naughton, A. (2016). Mechanisms of thermal decomposition of natural fibre composites. Composites Part B: Engineering, 84, 290-302.
DOI 10.1016/j.compositesb.2015.10.038

Faruk, O., Bledzki, A. K., Fink, H.-P., & Sain, M. (2014). Progress Report on Natural Fiber Reinforced Composites. Macromolecular Materials and Engineering, 299(1), 9-26.
DOI 10.1002/mame.201300008

Ferede, E., & Atalie, D. (2022). Mechanical and water absorption characteristics of sisal fiber reinforced polypropylene composite. Journal of Natural Fibers, 19(16), 14825–14838.
DOI 10.1080/15440478.2022.2069188

Garkhail, S. K., Heijenrath, R. W. H., & Peijs, T. (2000). Mechanical Properties of Natural-Fibre-Mat- Reinforced Thermoplastics based on Flax Fibres and Polypropylene. Applied Composite Materials, 7, 351–372.
DOI 10.1023/A:1026590124038

Ibrahim, I. D., Jamiru, T., Sadiku, R. E., Agwuncha, S. C., & Munda, S. L. (2017). Dependency of the Mechanical Properties of Sisal Fiber Reinforced Recycled Polypropylene Composites on Fiber Surface Treatment, Fiber Content and Nanoclay. Journal of Polymers and the Environment, 25, 427–434.
DOI 10.1007/s10924-016-0823-2

International Organization for Standardization. (2023). ISO 179-1: Plastics—Determination of Charpy impact properties—Part 1: Non-instrumented impact test. https://www.iso.org/standard/84393.html

International Organization for Standardization. (2025). ISO 527-2: Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics. https://www.iso.org/es/norma/527-2

International Organization for Standardization. (2019). ISO 527-1: Plastics—Determination of tensile properties—Part 1: General principles. https://www.iso.org/standard/527-1

Joseph, K., Thomas, S., & Pavithran, C. (1999). Effect of chemical treatment on the tensile properties of short sisal-fibre-reinforced polyethylene composites. Composites Science and Technology, 59, 1625–1640.
DOI 10.1016/S0266-3538(99)00024-X

Joseph, P. V., Joseph, K., Thomas, S., Pillai, C. K. S., Prasad, V. S., Groeninckx, G., & Sarkissova, M. (2003). The thermal and crystallisation studies of short sisal fibre reinforced polypropylene composites. Composites Part A: Applied Science and Manufacturing, 34(3), 253-264.
DOI 10.1016/S1359-835X(02)00185-9

Joseph, P. V., Mathew, G., Joseph, K., Thomas, S., & Pradeep, P. (2003). Mechanical properties of short sisal fiber-reinforced polypropylene composites: Comparison of experimental data with theoretical predictions. Journal of Applied Polymer Science, 88(3), 602–611.
DOI 10.1002/app.11498

Krishnasamy, S., Thiagamani, S. M. K., Kumar, C. M., Nagarajan, R., Shahroze, R. M., Siengchin, S., Ismail, S. O., & Devi, I. M. P. (2019). Recent advances in thermal properties of hybrid cellulosic fiber reinforced polymer composites. International Journal of Biological Macromolecules.
DOI 10.1016/j.ijbiomac.2019.08.231

Mahmud, S., Hasan, K. M. F., Jahid, M. A., Li, M., Shi, S. Q., & Zhu, J. (2021). Comprehensive review on plant-fiber reinforced polymeric biocomposites. Journal of Materials Science.
DOI 10.1007/s10853-021-05774-9

Monteiro, S. N., Calado, V., Rodriguez, R. J. S., & Margem, F. M. (2012). Thermogravimetric behavior of natural fibers reinforced polymer composites—An overview. Materials Science and Engineering: A, 557, 17-28.
DOI 10.1016/j.msea.2012.05.109

Munde, Y. S., Ingle, R. B., & Siva, I. (2019). Effect of sisal fiber loading on mechanical, morphological and thermal properties of extruded polypropylene composites. Materials Research Express, 6(8), 085307.
DOI 10.1088/2053-1591/ab1dd1

Muralidhar, B. A. (2020). Characterization of sisal/polypropylene composites treated with plasma. Tekstilna Industrija, 3(4), 202–212.
DOI 10.31881/TLR.2020.15

Ordoñez Benavides, J. (2016). Evaluación de las propiedades térmicas y mecánicas del polipropileno reforzado con zeolitas tipo ZSM-5. Institución Universitaria ITM. Disponible en: https://hdl.handle.net/20.500.12622/502

Paredes García, F. F. (2024). Caracterización mecánica y por FTIR de bio-composites reforzados con residuos lignocelulósicos: Caracterización mecánica a tracción y caracterización por FTIR de bio-composites reforzados con residuos lignocelulósicos [Tesis de Maestría/Doctorado, Escuela Politécnica Nacional, 45 pp. In: EPN, 2024. http://bibdigital.epn.edu.ec/handle/15000/25311

Patel, R. V., Yadav, A., & Winczek, J. (2023). Physical, Mechanical, and Thermal Properties of Natural Fiber-Reinforced Epoxy Composites for Construction and Automotive Applications. Applied Sciences, 13(8), 5126.
DOI 10.3390/app13085126

Sanadi, A. R., & Stelte, W. (2023). Effect of the characteristics of maleic anhydride-grafted polypropylene (MAPP) compatibilizer on the properties of highly filled (85%) kenaf-polypropylene composites. Materials Research, 26, e20220428.
DOI 10.1590/1980-5373-MR-2022-0428

Singh, M., Mohanty, A., & Misra, M. (2023). Upcycling of waste polyolefins in natural fiber and sustainable filler-based biocomposites: A study on recent developments and future perspectives. Composites Part B: Engineering, 263.
DOI 10.1016/j.compositesb.2023.110852

Tajvidi, M., & Takemura, A. (2009). Thermal Degradation of Natural Fiber-reinforced Polypropylene Composites. Journal of Thermoplastic Composite Materials, 23(3), 281-298.
DOI 10.1177/0892705709347063

Zhao, X., Copenhaver, K., Wang, L., Korey, M., Gardner, D. J., Li, K., Lamm, M. E., Kishore, V., Bhagia, S., Tajvidi, M., Tekinalp, H., Oyedeji, O., Wasti, S., Webb, E., Ragauskas, A. J., Zhu, H., Peter, W. H., & Ozcan, S. (2022). Recycling of natural fiber composites: Challenges and opportunities. Resources, Conservation and Recycling, 177, 105962.
DOI 10.1016/j.resconrec.2021.105962

Zhao, Y., & Xianhui, H. (2022). Degradation mechanisms in recycled polypropylene and strategies for property recovery. Waste Management, 135, 12–25.
DOI 10.1016/j.wasman.2021.08.032

Žepič Bogataj, V., Fajs, P., Peñalva, C., Omahen, M., Čop, M., & Henttonen, A. (2019). Utilization of recycled polypropylene, cellulose and newsprint fibres for production of green composites. Detritus: Multidisc. J. for Waste Res. & Residues, 7, 36-43. 10.31025/2611-4135/2019.13857

Related Contents

---