an official journal of: published by:
an official journal of: published by:
Editor in Chief: RAFFAELLO COSSU
Home

 

GO TO

INCREASING MATERIAL AND ENERGY RECOVERY FROM WASTE FACILITIES: HUMAN HEALTH AND ECOSYSTEM QUALITY IMPLICATIONS

  • Federico Sisani - Industrial Engineering, Università degli Studi di Perugia, Italy
  • Amani Maalouf - Department of Civil and Environmental Engineering, American University of Beirut, Lebanon
  • Francesco Di Maria - Industrial Engineering, Università degli Studi di Perugia, Italy
  • Marzio Lasagni - AISA Impianti SpA, Italy
  • Mutasem El-Fadel - Department of Civil and Environmental Engineering, American University of Beirut, Lebanon

DOI 10.31025/2611-4135/2019.13788

Released under CC BY-NC-ND

Copyright: © 2018 CISA Publisher

Abstract

This study presents a preliminary assessment of the implications on human health and ecosystem quality arising from increased materials and energy recovery from waste. Two scenarios were assessed encompassing different methods of waste distribution and elements of an integrated waste management system (composting, anaerobic digestion coupled with bio-methane recovery, incineration, and landfilling). The base scenario involved processing about 100,000 tonnes of municipal solid waste (MSW) per year and the modified scenario processed about 140,000 tonnes of MSW per year. The analysis was conducted following a life cycle approach using both midpoint and endpoint indicators. Based on a single tonne of waste processed, the results indicated lower (~ 66%) human toxicity with cancer and non-cancer effects (CTUh) and impact on human health (DALY) (~64% lower) for the modified scenario. Decrease in landfilling and increase in the recovery of the organic fraction from separated collection (OFSC) for biological treatment in the form of composting and anaerobic digestion in the modified scenario were the main drivers of these results. Considering savings in emissions from substituting the production of mineral fertilizers, the values of ecosystem quality (PDF*m2*year) indicated a lower impact (~86%) for the modified scenario.

Keywords

Editorial History

  • Received: 29 Oct 2018
  • Revised: 19 Feb 2019
  • Accepted: 22 Feb 2019
  • Available online: 31 Mar 2019

References

Arena, U., Mastellone, M.L., Perugini, F., 2003. The environmental performance of alternative solid waste management options: a life cycle assessment study. Chem. Eng. J. 96, 207–222

Bonoli A., Cecchini F., De Robertis C., Franchini F., Menescardi S., Neri, P., 2004, Analisi del ciclo di vita di un termovalorizzatore: il caso Silla2 dell’AMSA Milano, Ente per le Nuove tecnologie, l’Energia e l’Ambiente (ENEA), Bologna

Buttol, P., Masoni, P., Bonoli, A., Goldoni, S., Belladonna, V., Cavazzuti, C., 2007. LCA of integrated MSW management systems: case study of the Bologna district. Waste Manag. 27, 1059–1070

Candela, S., Bonvicini, L., Ranzi, A., Baldacchini, F., Broccoli, S., Cordioli, M., et al., 2015. Exposure to emissions from municipal solid waste incinerators and miscarriages: a multisite study of the moniter project. Environ. Int. 78, 51-60

Cangialosi, F., Intini, G., Liberti, L., Notarnicola, M., Stellacci, P., 2008. Health risk assessment of air emissions from a municipal solid waste incineration plant – a case study. Waste Manag. 28, 885-895

Cheng, H., Hu Yuanan, H., 2010. Municipal solid waste (MSW) as a renewable source of energy: Current and future practices in China. Bioresour. Technol. 101, 3816–3824

Cherubini, F., Bargigli, S., Ulgiati, S., 2008. Life cycle assessment of urban waste management: energy performances and environmental impacts. The case of Rome, Italy. Waste Manag. 28, 2552–2564

Deng, C., Xie, H., Ye, X., Zhang, H., Liu, M., Tong, Y., Ou, L., et al., 2016. Mercury risk assessment combining internal and external exposure methods for a population living near a municipal solid waste incinerator. Environ. Pollut. 219, 1060-1068

Di Maria, D., & Sisani, F. (2018). Effectiveness of municipal solid waste incinerators in replacing other fuels. A primary energy balance approach for the EU28. Waste Manag. Res.
DOI 10.1177/0734242x18785737

Di Maria, F., Sisani, F., & Contini, S. (2018). Are EU waste-to-energy technologies effective for exploiting the energy in bio-waste? Appl. Energ. 230, 1557-1572.
DOI 10.1016/j.apenergy.2018.09.007

EC-European Commission, 2012. Characterization Factors of the ILCD Recommended Life Cycle Impact Assessment Methods, Database and Supporting Information, first ed.. Joint Research Centre, Institute for Environment and Sustainability, Publications Office of the European Union, Luxembourg

El-Fadel, M., Findikakis, A.N., Leckie, J.O., 1997. Environmental impacts of solid waste landfilling. J. Environ. Manage. 50, 1–25.
DOI 10.1006/jema.1995.0131

Goedkoop, M., Oele, M., Leijting, J., Ponsioen, T., Meijer, E. 2016. Introduction to LCA with SimaPro. Report version 5.2. Available at: (accessed 10 12 2016)

Grosso, M., Motta, A., and Rigamonti, L., 2010. Efficiency of energy recovery from waste incineration, in the light of the new Waste Framework Directive. Waste Manag. 30, 1238–1243

ISO 14040. 2006. Environmental Management: Life Cycle Assessment, Principles and Guidelines. International Organization of Standardization, Geneva 2006

ISO 14044. 2006. Environmental Management: Life Cycle Assessment – Requirements and guidelines. International Organization of Standardization, Geneva 2006

ISPRA (2018) Rapporto Rifiuti Urbani. Edizione 2018. ISPRA, Rapporti 297/2018

Karademir, A., 2004. Health risk assessment of PDD/F emissions from a hazardous and medical waste incinerator in Turkey. Environ. Int. 30, 1027-1038

Liamsanguan, C., Gheewala, S.H., 2007. Environmental assessment of energy production from municipal solid waste incineration. Int. J. Life Cycle Assess. 12 (7), 536–539

Ma, W., Tai, L., Qiao, Z., Zhong, L., Wang, Z., Fu, K., & Chen, G., 2018. Contamination source apportionment and health risk assessment of heavy metals in soil around municipal solid waste incinerator: A case study in North China. Sci. Total Environ. 631-632, 348-357

McDougall, F., White, P., Franke, M., 2001. Integrated Solid Waste Management: Life Cycle Inventory, second ed. Blackwell Science Ltd., Oxford, United Kingdom

Morselli, L., Luzi, J., De Robertis, C., Bassura, I., Carrillo, V., Passarini, F., 2007. Assessment and comparison of environmental performances of a regional incineration network. Waste Manag. 27, S85–S91

Ni, W., Chenb, Y., Huang, Y., Wang, X., Zhang, G., Luo, J., et al., 2014. Hair mercury concentrations and associated factors in an electronic waste recycling area, Guiyu, China. Environ. Res. 128, 84-91

Ranzi, A., Fustinoni, S., Erspamer, L., Campo, L., Gatti, M.G., Bechtold, P., et al., 2013. Biomonitoring of the general population living near a modern solid waste incinerator: a pilot study in Modena, Italy. Environ. Int. 61, 88-97

Reis, M.F., Sampaio, C., Brantes, A., Aniceto, P., Melim, M., Cardoso, L., et al., 2007. Human exposure to heavy metals in the vicinity of portuguese solid waste incinerators - part 1: biomonitoring of Pb, Cd and Hg in blood of the general population. Int. J. Hyg. Environ. Health 210, 439-446

Rigamonti, L., Grosso, M., Giugliano, M., 2009. Life cycle assessment for optimising the level of separated collection in integrated MSW management systems. Waste Manag. 29, 934–944

Rovira, J., Nadal, M., Schuhmacher, M., Domingo, J.L., 2018, Concentrations of trace elements and PCDD/Fs around a municipal solid waste incinerator in Girona (Catalonia, Spain). Human health risks for the population living in the neighborhood. Total Environ. 630, 34-45

Schuhmacher, M., Domingo, J.L., Agramunt, M.C., Bocio, A., Muller, L., 2002. Biological monitoring of metals and organic substances in hazardous-waste incineration workers. Int. Arch. Occup. Environ. Health 75, 500-506

Waste Framework Directive, 2008. Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives. Off. J. Eur. Union L 312, 330. http://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX: 32008L0098&from=EN

Wernet, G., Bauer, C., Steubing, B., Reinhard, J., Moreno-Ruiz, E., Weidema, B., 2016. The ecoinvent database version 3 (part I): overview and methodology. Int. J. Life Cycle Ass. 21 (9), 1218–1230 (accessed 13 09 2016)

Related Contents